oxbrbtx/PrimAITE
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

#2266 - fixed typos from PR suggestions

Browse Source
This commit is contained in:
Chris McCarthy
2024-04-30 14:08:12 +01:00
parent 81d4006240
commit a141c8d212
3 changed files with 9 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
docs/source/configuration/simulation/nodes/network_examples.rst
View File

@@ -7,10 +7,10 @@
``Network Examples``
====================
The below examples demonstrate how to configure different types of network in PrimAITE. They examples all have network
topology diagrams. Each rectangle represents a single Node, with the hostname inside of the rectangle. Physical inks are
The below examples demonstrate how to configure different types of network in PrimAITE. These examples all have network
topology diagrams. Each rectangle represents a single Node, with the hostname inside of the rectangle. Physical links are
represented by lines between two nodes. At each end of the line is the network interface number on the node the link is
connected to. Where the network interface is alsoa layer-3 device, the label also contains the ip address and subnet
connected to. Where the network interface is also a layer-3 device, the label also contains the ip address and subnet
mask in CIDR format (``<ip address>/<no mask bits>``). All network diagrams on this page use the following node type
colour key:
@@ -167,7 +167,7 @@ Finally, once the network is configured as expected, a connectivity test should
pc_1.ping("192.168.1.13)
If SysLog capture is toggled on and the simulation log level is set to INFO, the `pc_1` the result of the ping should be
captures in the `pc_1` SysLog:
captured in the `pc_1` SysLog:
.. code-block:: text
@@ -392,7 +392,7 @@ connections, but the ACL that allows the nodes in the LAN to communicate with th
pc_1.sys_log.show()
If SysLog capture is toggled on and the simulation log level is set to INFO, the `pc_1` the result of the ping should be
captures in the `pc_1` SysLog:
captured in the `pc_1` SysLog:
.. code-block:: text
@@ -739,7 +739,7 @@ Each node is configured to ensure it meets the specific security and operational
10: # Permit all internal outbound traffic
action: PERMIT
dmz_inbound_acl:
7: # Permit Database service on some_tech_db_srv to respong to some_tech_web_srv
7: # Permit Database service on some_tech_db_srv to respond to some_tech_web_srv
action: PERMIT
src_ip: 10.10.1.11
src_port: POSTGRES_SERVER